Our Health Library information does not replace the advice of a doctor. Please be advised that this information is made available to assist our patients to learn more about their health. Our providers may not see and/or treat all topics found herein.
Home Lung Function Test
A home lung function test uses a peak flow meter or a home spirometer to monitor and evaluate any breathing problems you may have on a day-to-day basis. A peak flow meter allows you to measure your peak expiratory flow. A home spirometer allows you to measure your forced expiratory volume at 1 second (FEV1).
If you have a lung disease, such as asthma, your doctor may test your peak inspiratory flow (PIF) and peak expiratory flow (PEF) to measure the amount of air you can inhale and exhale. This is part of a more complete lung function test.
Why It Is Done
- Measure how well your lungs are working if you have a long-term (chronic) lung disease, such as asthma.
- Guide the treatment and monitor the effectiveness of treatment for asthma. Peak expiratory flow monitoring provides information to help people with asthma make better treatment decisions.
- Monitor your lung function if you are regularly exposed to substances at work that can damage your lungs (occupational asthma).
- Monitor for early signs of rejection if you have had a lung transplant.
How To Prepare
To perform the peak expiratory flow (PEF) test, you need a peak flow meter. A peak flow meter is an inexpensive handheld device you breathe into as hard and as fast as you can.
Read and follow the instructions included with the peak flow meter. Ask your doctor to show you how to use this device before you use it at home. If you have questions about how to use a peak flow meter or how to read the results, talk with your doctor.
If you use medicine to help with breathing (such as for asthma), talk to your doctor about the amount of time you should wait to test your lung function after taking your medicine. You may need to wait a few hours after taking the medicine to do a lung function test. Or your doctor may recommend that you test your lung function in the morning before you take your medicine.
Avoid eating a heavy meal for about 3 hours before performing a PEF test. Be sure to stand up to help you take as large a breath as you can. Use the same position every time you test your PEF. Peak flow monitoring relies on your trying as hard as you can. For accurate results, be sure to give the test your best effort every time.
How It Is Done
Before you begin to test your peak expiratory flow (PEF), remove any gum or food you may have in your mouth. Follow these steps to use your peak flow meter:
- Set the pointer on the gauge of the peak flow meter to 0 (zero).
- Attach the mouthpiece to the peak flow meter.
- Stand up to allow yourself to take a deep breath. Make sure you use the same position each time you test your PEF.
- Take a deep breath in. Place the peak flow meter mouthpiece in your mouth and close your lips tightly around the outside of the mouthpiece. Do not put your tongue inside the mouthpiece.
- Breathe out as hard and as fast as you can using a huff. You do not need to breathe out for more than a second.
- Note the value on the gauge.
- Move the pointer on the gauge back to 0 (zero) before you blow again.
- Blow into the peak flow meter 2 more times. Record your values each time you blow. If you cough or make a mistake during the testing, do the test over.
- After you have blown into your peak flow meter 3 times, record the highest value on your daily record sheet.
How It Feels
Breathing in and out very quickly during these tests may make you feel lightheaded or may make you cough. If you feel like you are going to pass out, stop the test.
There are no significant risks linked with measuring peak expiratory flow (PEF). Breathing in and out very quickly during the test may make you feel lightheaded or may make you cough. If you feel lightheaded, stop the test.
A home lung function test uses a peak flow meter or a home spirometer to monitor and evaluate any breathing problems you may have on a day-to-day basis. A peak flow meter allows you to measure your peak expiratory flow (PEF). PEF measures how much air you breathe out when you try your hardest. A home spirometer allows you to measure your forced expiratory volume at 1 second (FEV1). Results from these tests can be compared to monitor the progression of disease or help measure your response to medical treatment for a long-term (chronic) lung disease, such as asthma.
Peak flows are compared to charts that list normal values based on age, sex, race, and height. They also can be compared with your personal best measurement. Check with your doctor or read the information included with your peak flow meter to find your normal range, which will vary depending on the type of breathing problems you may have. If you find abnormal results on any of the tests, discuss them with your doctor.
- Normally, peak flows vary slightly throughout the day. They are usually lower in the morning and higher in the afternoon.
- A person with poorly controlled asthma may have peak flows that vary more widely throughout the day.
What Affects the Test
The accuracy of peak flow monitoring depends on your effort during the test. Results will be inaccurate if you do not follow directions or do not give your best effort during testing. The following factors also may affect the results of peak flow monitoring:
- Using medicine that expands the airways in the lungs within 4 hours before the test may improve test results.
- Using sedatives before the test may worsen test results.
- People who have pain while breathing may not be able to breathe normally. So the results of their tests may be misleading.
What To Think About
- Your doctor may do a complete series of lung function tests to confirm a lung disease, monitor the progression of lung disease, or monitor the effectiveness of treatment. To learn more, see the topic Lung Function Tests.
- Checking your peak expiratory flow (PEF) provides information that may help you decrease your asthma symptoms and keep your lungs as healthy as possible. The benefits of better lung function may include improved quality of life, fewer emergency department visits, greater personal control and confidence, and reduced use of oral steroid medicines, antibiotics, and bronchodilators. To learn more about controlling your asthma, see the topic Asthma in Teens and Adults.
- When using a home peak flow meter, it is best to use the same meter over time. Different brands of meters give different results. If you change your peak flow meter, you need to redetermine your personal best measurement using the new machine.
- Wash your meter according to the manufacturer's directions to prevent growth of bacteria and fungi.
- PEF is lowest in the early morning and highest in the afternoon. If you measure your PEF only once a day, do so first thing in the morning before using any bronchodilator medicine.
- People with intermittent or mild persistent asthma may not need to check their PEF every day. But if symptoms develop, checking peak expiratory flow often for a period of time may be helpful in bringing asthma under control.
Other Works Consulted
- Chernecky CC, Berger BJ (2008). Laboratory Tests and Diagnostic Procedures, 5th ed. St. Louis: Saunders.
- Fischbach FT, Dunning MB III, eds. (2009). Manual of Laboratory and Diagnostic Tests, 8th ed. Philadelphia: Lippincott Williams and Wilkins.
- Holcroft CA, et al. (2003). Measurement characteristics of peak expiratory flow. Chest, 124(2): 501–510.
- National Institutes of Health (2007). National Asthma Education and Prevention Program Expert Panel Report 3: Guidelines for the Diagnosis and Management of Asthma (NIH Publication No. 08–5846). Available online: http://www.nhlbi.nih.gov/guidelines/asthma/index.htm.
Current as of: October 26, 2020
Author: Healthwise Staff
E. Gregory Thompson MD - Internal Medicine
Adam Husney MD - Family Medicine
Elizabeth T. Russo MD - Internal Medicine
To learn more about Healthwise, visit Healthwise.org.
© 1995-2021 Healthwise, Incorporated. Healthwise, Healthwise for every health decision, and the Healthwise logo are trademarks of Healthwise, Incorporated.